Short Tillers for the Telstar 28
-
- Posts: 1136
- Joined: Mon Nov 24, 2008 6:15 pm
- Location: SW Florida
- Contact:
Re: Short Tillers for the Telstar 28
They are about a foot shorter. Much better for our smallish cockpit.
I just spoke to H&L Marine Woodwork, who makes most of these custom tillers for most of the sailboats around. They will be shutting down the factory in about 5 months, but will make these last few for us. Anyone who eventually wants one had better order it now. Total cost should be around $70 including US 48 state shipping.
I just spoke to H&L Marine Woodwork, who makes most of these custom tillers for most of the sailboats around. They will be shutting down the factory in about 5 months, but will make these last few for us. Anyone who eventually wants one had better order it now. Total cost should be around $70 including US 48 state shipping.
Ron Marcuse
Telstar 28 #359 "Tri-Power"
Telstar 28 #359 "Tri-Power"
-
- Posts: 65
- Joined: Sat Dec 01, 2012 3:24 pm
- Contact:
Re: Short Tillers for the Telstar 28
Hi Ron,
I've been wanting to bite the bullet on this one for awhile and I think the time is now. Let me know the total cost and where to send the check and I will facilitate that immediately. Thanks for staying on top of this.
best regards,
gary g.
I've been wanting to bite the bullet on this one for awhile and I think the time is now. Let me know the total cost and where to send the check and I will facilitate that immediately. Thanks for staying on top of this.
best regards,
gary g.
-
- Posts: 1136
- Joined: Mon Nov 24, 2008 6:15 pm
- Location: SW Florida
- Contact:
Re: Short Tillers for the Telstar 28
Gary -
I'll need your shipping address to get the total price from H&L. It should be around $75 depending on how far you are from southern California.
I'll need your shipping address to get the total price from H&L. It should be around $75 depending on how far you are from southern California.
Ron Marcuse
Telstar 28 #359 "Tri-Power"
Telstar 28 #359 "Tri-Power"
-
- Posts: 1136
- Joined: Mon Nov 24, 2008 6:15 pm
- Location: SW Florida
- Contact:
Re: Short Tillers for the Telstar 28
I'll need a shipping address for anyone who wants one of these shorter tillers for the 28. I'm ordering 4 so far and I should have the exact cost for each within 2 or 3 days, but I'll be in Miami until Monday. The differences will be for shipping charges from California, and sales tax if you live there. You can pay the association either by check or paypal once I know the cost.
Ron Marcuse
Telstar 28 #359 "Tri-Power"
Telstar 28 #359 "Tri-Power"
-
- Posts: 1136
- Joined: Mon Nov 24, 2008 6:15 pm
- Location: SW Florida
- Contact:
Re: Short Tillers for the Telstar 28
I expect to get the prices with shipping from H&L Marine Woodwork tomorrow (Friday). They should be under $70 apiece. I'll let each of you know how much you have to send me. If it's being shipped to California you'll have to pay sales tax as well. Paypal or a check are both OK, but you'll have to add 5% to the total for Paypal (that's their fee).
There will be no more tillers. H&L is shutting down soon.
There will be no more tillers. H&L is shutting down soon.
Ron Marcuse
Telstar 28 #359 "Tri-Power"
Telstar 28 #359 "Tri-Power"
-
- Posts: 1136
- Joined: Mon Nov 24, 2008 6:15 pm
- Location: SW Florida
- Contact:
Re: Short Tillers for the Telstar 28
OK - here's the breakdown -
Gary - $64.04
Steve - $64.04
Simon - $66.32 (includes sales tax).
I need the payments as soon as possible. If you prefer to use paypal, the id is TelstarCommodore@comcast.net. You'll have to add 5% for the fee.
Otherwise, please mail a check made out to the International Telstar Owners Assoc at
3623 Darin Drive
Punta Gorda, FL 33950
Gary - $64.04
Steve - $64.04
Simon - $66.32 (includes sales tax).
I need the payments as soon as possible. If you prefer to use paypal, the id is TelstarCommodore@comcast.net. You'll have to add 5% for the fee.
Otherwise, please mail a check made out to the International Telstar Owners Assoc at
3623 Darin Drive
Punta Gorda, FL 33950
Ron Marcuse
Telstar 28 #359 "Tri-Power"
Telstar 28 #359 "Tri-Power"
-
- Posts: 111
- Joined: Tue Nov 27, 2012 7:37 am
- Contact:
Re: Short Tillers for the Telstar 28
Thanks Ron. I just sent a check which should arrive on the 27th or before.
Steve & Mittie Wooden
Bayou Vista TX (Galveston)
"Gnarly's Poop Deck" Hull #340
Bayou Vista TX (Galveston)
"Gnarly's Poop Deck" Hull #340
-
- Posts: 83
- Joined: Wed Feb 25, 2009 5:13 pm
- Contact:
Re: Short Tillers for the Telstar 28
Ron
Is it too late to order one? I am in Maryland and I can send you an echeck today if it is still possible.
Mark
Is it too late to order one? I am in Maryland and I can send you an echeck today if it is still possible.
Mark
-
- Posts: 1136
- Joined: Mon Nov 24, 2008 6:15 pm
- Location: SW Florida
- Contact:
Re: Short Tillers for the Telstar 28
Mark -
I'll give them a call on Monday. They're shutting down the factory now, but maybe they can do one more? Would you take one that was not varnished? They mentioned that that will be the first part of the company that they are closing.
I'll give them a call on Monday. They're shutting down the factory now, but maybe they can do one more? Would you take one that was not varnished? They mentioned that that will be the first part of the company that they are closing.
Ron Marcuse
Telstar 28 #359 "Tri-Power"
Telstar 28 #359 "Tri-Power"
-
- Posts: 83
- Joined: Wed Feb 25, 2009 5:13 pm
- Contact:
Re: Short Tillers for the Telstar 28
I would, but much prefer varnished
Who is online
Users browsing this forum: No registered users and 9 guests