to coat the exposed portions of the shower area. I would guess that I don't need more than a couple of quarts. The one I liked using has been taken off the market. I used a 2 part epoxy meant for factory floors to do the bilge area and it has reall stood up. Only recently has the boat been sealed up and the bilges dry. The poat has been routinely pumped for years and there is no hint of wear nor sign of adhesion failure. Any suggestions?
Lou
looking for a 2 part industrial epoxy ...
-
- Posts: 319
- Joined: Wed Jul 08, 2009 1:19 pm
- Contact:
looking for a 2 part industrial epoxy ...
I'd recommend going with Progressive Epoxy Polymers out of NH. www.epoxyproducts.com
Paul knows his stuff and his prices are far better than the major name brand epoxies.
Paul knows his stuff and his prices are far better than the major name brand epoxies.
-
- Posts: 319
- Joined: Wed Jul 08, 2009 1:19 pm
- Contact:
looking for a 2 part industrial epoxy ...
Thanks Dan.
Lou
Lou
Who is online
Users browsing this forum: No registered users and 9 guests