I figure that the best way to give you my dimensions is in comparison to Pats diagram on his june 29th post @6:50amjohnco wrote:Many thanks Lou, Dimensions of the curved part that fits into the casing would be very handy. Does your centreboard have a groove for the ropes? Mine has two ropes connected by a loop one feeding forward through a hole in the casing and the other aft with cleats to tie them off but I'm not sure how or exactly where they connect to the centreboard.
Best wishes,
Cliff
Overall length Pats 57 0/16 = my 58 1/2"
Width of CB bottom Pats 15 = mine 16 1/2
trailing edge up to curve pats 15 1/2 = mine 17 1/4
top cut out at bottom pats 8 = mine 6 1/2
i measured the top of that cut out at 13", measured at the hight of the handle
Handle pats 9" = mine 9"
Measured from leading edge, across the bottom of the upper cut out to the back edge of the curve = 38 1/4
Here is a picture of mine.
My centerboard before shaping - traced directly from the original CB. Centerboard.jpg (25.18 KiB) Viewed 120 times
Let me know if you can figure it out from here.
Lou