International Telstar Owners Association

thank you joe ! i am trying too as much as i afford ... maybe there are some ideas that some else wants to use or just to show what can be done regarding comfort , design and looking in such a small boat like this !

i forgot to post a few pictures of the aluminum frame for the doors opening. they are made from "L" straight profile and because i don't have a bending machine i have cut them , curved and welded on each side. after that grinding , sandpaper and some synthetic grinding cloth ( don't know the term for it ) which is giving "brushed" appearance . you can see them in the previous post with the hinges .

here they are ...

after finished the doors frames and the central hinge system i have left this sector and move forward ...

now ...for a better understanding of what is in my head with this project , i will present some 3D drawings that i have made . first a general view with the kitchen

here are more components added . you can see the bathroom separation wall , the two couches , table and minibar shelf and the other side storage locker with working space .

and this is a general layout with the front "lazy place ", some material texture added and a view of the bathroom ...

thank you karl for your message !

i will post some progress ... the bath separation wall .

the frame is all made from alu profiles , the center middle section is a H profile bended on a roller machine . all contour is U profile or L for holding the wall in position. the wall is made from 6mm polycarbonate sheet , very light and with all fittings can take the weigh of the person if pushing against it. there is plenty of room inside so a 180cm/90kg man can take a shower and also can bend down . i am pretty happy with the result

and this a the view from inside the saloon ... very nice warm rounded shape blending into the contour of the boat . on the lower side the wall is left open for feet space . the bottom was fiberglassed and there will be the shower/sink water colecting and a bilge pump for draining .

I was looking for more information on ar99kid's work ... so I started looking for it and I discovered this:

https://www.facebook.com/forumclub4x4/p ... =3&theater

and this...

https://adevarul.ro/locale/arad/a-fost- ... index.html

for this reason the messages stop here.


I've never known you ... but your genius that ranges in various fields will remain as long as the internet will live with sites of this type.


I'm sorry I lost a sure friend before I even met him.

REST IN PEACE

What a shame. He was doing such great work on the 26' refit.

RIPOSA IN PACE SAILOR!!!