Genoa sheet rubs window and gelcoat

Information and posts about the rigging and sails.
Post Reply
doc87
Posts: 1
Joined: Tue Dec 09, 2014 2:26 pm
Contact:

Genoa sheet rubs window and gelcoat

Post by doc87 »

Purchased a 2006 Telstar 28. I noted the genoa sheet contacts either the side window (plexiglass) or the gelcoat at the edge of the cabin top___which is between the lead block and the winch. In fact, there are numerous grooves on the upper part of the window. Does anyone else have this problem? The winch seems to be located in the usual telstar configuration and the block/car is likely the original configuration.
Any suggestions.
Thxs.
John
vancouver
Posts: 77
Joined: Thu Nov 27, 2008 10:58 pm
Location: Vancouver, British Columbia
Contact:

Re: Genoa sheet rubs window and gelcoat

Post by vancouver »

I am having a little problem visualizing the problem. But are you running the genoa sheet back from the car back to a turning block on the pushpit. It should be nowhere near the window.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests