Leaking amas
-
- Posts: 40
- Joined: Tue Mar 17, 2015 7:11 pm
- Location: CT
- Contact:
Re: Leaking amas
I believe one way water gets past the hatches is past the "dogs" toggles or whatever you want to call the 3 devices that turn to hold the hatch closed. They sit in depressions in the hatch, which fill with water. There are small O-rings that are supposed to seal the shaft that connects the T handle on the outside of the hatch to the locking portion on the inside. Mine were worn enough to leak. I've tried some Teflon pipe thread paste, which bills itself as non-hardening. You have to press out a stainless pin, which holds the piece together. This seems to have greatly reduced the water ingress, at least for this season.
- Cruissser
- Posts: 67
- Joined: Tue Sep 12, 2017 1:47 pm
- Location: South Dakota
- Contact:
Re: Leaking amas
Thanks Bill, great advice....looks like I better get some teflon thread paste!
Randy
Randy
-
- Posts: 55
- Joined: Sat Mar 28, 2009 4:27 am
- Contact:
Re: Leaking amas
I want to do a bottom paint of Hull #382 on my trailer. What is the best way to open the amas up and close when finished while on the trailer? I can move the boat about 20" to 22" on my trailer for complete painting. Thank you very much Steve Hull #382
Who is online
Users browsing this forum: No registered users and 19 guests