I have to replace the head to holding tank hose and am wondering if anybody has done this and what hose you have used.
I read an article that recommends Shields’ Series 148 Heavy-Duty Vinyl Hose.
I am also curious about Shield's Series 101 No-Odor Super Head Hose.
Coming from the head there is nearly a U bend in the hose to get it to the holding tank and from what I have read it seems the real heavy duty hoses won't bend like that.
Any experiences, please share.
Thanks
Alan
Cathalan
Head to Holding Tank hose
-
- Posts: 100
- Joined: Tue Nov 17, 2009 11:47 am
- Location: Stoughton, Wisconsin
- Contact:
Head to Holding Tank hose
Cathy & Alan #313
-
- Posts: 77
- Joined: Thu Nov 27, 2008 10:58 pm
- Location: Vancouver, British Columbia
- Contact:
Head to Holding Tank hose
I changed my plumbing with the high grade hose. There were several bends with a radius that I could not get the hose to do. I used rigid pipe and elbows for the bends. There is some controversy about using rigid pipe. But I have had no problems.
Who is online
Users browsing this forum: No registered users and 15 guests