Page 1 of 1
Motor steering arm interference
Posted: Sun Feb 24, 2019 12:36 am
by anthonyk
Regarding the T28, when the motor is in the down position, everything works fine, but when I raise (tilt back) the motor (when sailing) the motor linkage/steering arm moves down several inches and interferes with the tiller linkage, preventing it from moving freely. I hope that makes sense. Has anyone had this problem?
Re: Motor steering arm interference
Posted: Wed Feb 27, 2019 10:49 pm
by wooden
If I understand what you are indicating, the answer is yes, and that is why there is a pin to uncouple the tiller from the motor linkage.
Re: Motor steering arm interference
Posted: Thu Feb 28, 2019 12:26 am
by anthonyk
Hi Wooden, thanks for responding! With the motor uncoupled ( pin out) and motor tilted back, I have the interference problem. What can I do to solve this? I only have this problem when I tilt the motor back for sailing..
Re: Motor steering arm interference
Posted: Thu Feb 28, 2019 1:56 pm
by wooden
That is interesting. I dont know why you still have interference with the pin out. Perhaps someone else can help. Sorry that I don't have a solution for you.
Re: Motor steering arm interference
Posted: Mon Mar 04, 2019 4:31 pm
by anthonyk
Ok, problem solved...only needed to adjust the engine pod..