I had difficulty moving the centerboard. I just found out from my repair man that the strap eye with the bolts intact had pulled out of the centerboard causing the rope to be all knotted up.
Does anyone know if this can be fixed without removing the centerboard? In other words, when the centerboard is raised or lowered is there sufficient access to make a reliable repair?
Does anyone know if the centerboard can likely be fixed or if I will have to order a new one? I assume I can get one from Performance Cruising.
Centerboard hoist
-
- Posts: 77
- Joined: Thu Nov 27, 2008 10:58 pm
- Location: Vancouver, British Columbia
- Contact:
Centerboard hoist
Here is a video posted by Performance Cruising on replacing the centerboard. I don't believe you can access any of the components without removing the board.
Performance Cruising is no longer making T2s and I am not sure about parts availability from them.
http://vimeo.com/4875979
Performance Cruising is no longer making T2s and I am not sure about parts availability from them.
http://vimeo.com/4875979
-
- Posts: 47
- Joined: Tue Jul 14, 2009 7:10 pm
- Contact:
Centerboard hoist
Centerboard must be removed to affect any repairs. PCI does not handle Telstar parts. Why do you need a new centerboard? Is it rotted? If not repair the old one.
-
- Posts: 55
- Joined: Fri Dec 05, 2008 9:26 pm
- Contact:
Centerboard hoist
Finally got the boat up and the board out. The wood around the strap on the back of the centerboard rotted. We plan to cut cut out the bad wood and insert a patch which we will then glass in. we will taper the good wood back so the overall thickness of the board will be held. I cannot figure out why the wood in this area rotted while the leading edge which is almost always in the water didn't.
-
- Posts: 55
- Joined: Fri Dec 05, 2008 9:26 pm
- Contact:
Centerboard hoist
I tried to post pictures, but I get a message that the board attachment quota has been reached.
-
- Posts: 1136
- Joined: Mon Nov 24, 2008 6:15 pm
- Location: SW Florida
- Contact:
Centerboard hoist
"I tried to post pictures, but I get a message that the board attachment quota has been reached."
Until Dan increases the storage area, you'll have to use one of the picture storage services, like PhotoBucket. They're free. Dan has been aware of this for a year or two now.
Until Dan increases the storage area, you'll have to use one of the picture storage services, like PhotoBucket. They're free. Dan has been aware of this for a year or two now.
Ron Marcuse
Telstar 28 #359 "Tri-Power"
Telstar 28 #359 "Tri-Power"
-
- Posts: 55
- Joined: Fri Dec 05, 2008 9:26 pm
- Contact:
Centerboard hoist
Not a problem. If anyone wants to see the photos, message me and I'll be glad to send them.
Who is online
Users browsing this forum: No registered users and 9 guests